KRACK Wi-Fi attack threatens all networks: How to stay safe and what you need to know
- 17 October, 2017 01:23
A devastating flaw in Wi-Fi’s WPA security protocol makes it possible for attackers to eavesdrop on your data when you connect to Wi-Fi.
Dubbed KRACK, the issue affects the Wi-Fi protocol itself—not specific products or implementations—and “works against all modern protected Wi-Fi networks,” according to Mathy Vanhoef, the researcher that discovered it. That means that if your device uses Wi-Fi, KRACK likely impacts it.
Read on for what you need to know about the KRACK Wi-Fi vulnerability, from how it works to how to best protect yourself against it.
How does KRACK break Wi-Fi security?
KRACK (short for, uh, Key Reinstallation AttaCK) targets the third step in a four-way authentication “handshake” performed when your Wi-Fi client device attempts to connect to a protected Wi-Fi network.
The encryption key can be resent multiple times during step three, and if attackers collect and replay those retransmissions in particular ways, Wi-Fi security encryption can be broken.
That’s the CliffsNotes version. For a more technically detailed explanation, check out Mathy Vanhoef’s KRACK attacks website. On the plus side, hackers would need to be physically close to you in order to intercept your Wi-Fi authentication requests.
What devices are affected by KRACK?
If your device uses Wi-Fi, it’s likely vulnerable to the KRACK Wi-Fi security flaw to some degree. We go into greater detail about how particular devices are affected by KRACK in a dedicated section further below.
What happens when Wi-Fi security is broken?
For starters, the attacker can eavesdrop on all traffic you send over the network. “This can be abused to steal sensitive information such as credit card numbers, passwords, chat messages, emails, photos, and so on,” Vanhoef says.
For a deeper look at the potential impact, check out PCWorld’s article on what an eavesdropper sees when you use an unsecured Wi-Fi hotspot. It’s a few years old, but still illuminating.
The United States Computer Emergency Readiness Team also issued this warning as part of its KRACK security advisory, per Ars Technica: “The impact of exploiting these vulnerabilities includes decryption, packet replay, TCP connection hijacking, HTTP content injection, and others.” HTTP content injection means the attacker could sneak code into the websites you’re looking at to infect your PC with ransomware or malware.
So yeah, it’s bad. Keep your security software active and up to date, just in case.
Is Wi-Fi security being broken in the wild?
“We are not in a position to determine if this vulnerability has been (or is being) actively exploited in the wild,” Vanhoef says. US-CERT’s advisory didn’t include any information about whether KRACK is being exploited in the wild, either.
How to protect yourself from KRACK’s Wi-Fi flaw
Keep your devices up to date! Vanhoef says “implementations can be patched in a backwards-compatible manner.” That means that your device can download an update that protects against KRACK and still communicate with unpatched hardware while being protected from the security flaw.
Given the potential reach of KRACK, expect those patches to come quickly from major hardware and operating system vendors.
Until those updates appear, consumers can still take steps to safeguard against KRACK. The easiest thing would be to simply use a wired ethernet connection. That’s not always possible though.
If you need to use Wi-Fi, stick to sites that use HTTPS encryption, or hop on a virtual private network (VPN) to potentially hide all of your network traffic.
The Electronic Frontier Foundation’s superb HTTPS Everywhere browser plug-in can force all sites that offer HTTPS encryption to use that protection, while PCWorld’s guide to the best VPN services can help you pick out a trustworthy provider. And again, keep your security software up to date to protect against potential code injected malware.
Device and router Wi-Fi security FAQ
Is my phone at risk?
KRACK is a different sort of attack than previous exploits, in that it doesn’t go after devices, it goes after the information you use them to send. So while the data stored on your phone is safe from hacking, whenever you use it to send a credit card number, password, email, or message over Wi-Fi, that data could be stolen.
So my router is vulnerable?
That’s closer, but still not totally accurate. It’s not the device that’s at risk, it’s the information, so the sites you visit that aren’t HTTPS are most vulnerable.
Oh, so I should change my Wi-Fi password then?
Well, you can, but it’s not going to stop the likelihood of attack. The exploit targets information that should have been encrypted by your router, so the attacker doesn’t need to crack your password to implement it. In fact, it has no bearing on the attack whatsoever.
So all devices are at risk?
Now you’re getting it. However, while any device that sends and receives data over Wi-Fi is at risk, the researchers who uncovered the attack said Android devices were more at risk than other mobile phones.
Great, I have an Android phone. But I’m running Nougat so I’m safe, right?
Unfortunately, no. Newer phones running Android 6.0 or later are actually more at risk since there is an existing vulnerability in the code that compounds the issue and makes it easier to “intercept and manipulate traffic.”
So is my iPhone safe?
Safer than Android, but still not entirely safe.
What about my Mac?
The researchers who found the bug initially had a harder time cracking macOS, but subsequent attacks were easier to implement.
And Windows PCs too?
Yup, same deal.
I run Linux. I’m impenetrable to attack, right?
Not quite. Researchers actually found that Linux machines were the most vulnerable desktop devices, with a similar bug to the one found in the Android code.
So should I turn off Wi-Fi?
That’s probably not a viable option for most people, but if you’re completely panic-stricken, then the only way to be completely safe is to avoid using Wi-Fi until you know your router has been patched.
OK, I’m not doing that. What else can I do?
Right now, all you can do is wait. Google has already confirmed that it is aware of the issue and is working on a patch, and Apple and Microsoft will presumably do the same, as well as Linux purveyors.
What about my router?
First, you should check to see if your router has any pending firmware updates. Most people aren’t as vigilant in updating their routers as they are with their phones or PCs, so log into your admin page and install any waiting updates.
If there aren’t any, it’s a good habit to check every day, since companies will be rolling out patches over the coming weeks, with some already bring implemented.